Mô-đun Siemens SIMATIC S7-1500 6ES7532-5HF00-0AB0

Mô-đun Siemens SIMATIC S7-1500, mã đặt hàng 6ES7532-5HF00-0AB0, là thiết bị thuộc dòng SIMATIC S7-1500 dành cho các hệ thống tự động hóa công nghiệp.

Phù hợp khi cần bổ sung kênh tín hiệu cho tủ điều khiển hiện có.

Bảng thông số SIMATIC S7-1500 (theo datasheet Siemens)

- General information / Product type designation: AQ 8xU/I HS

- General information / HW functional status: from FS01

- General information / Firmware version: V2.1.0

- CiR - Configuration in RUN / Reparameterization possible in RUN: Yes

- CiR - Configuration in RUN / Calibration possible in RUN: Yes

- Supply voltage / Rated value (DC): 24 V

- Supply voltage / permissible range, lower limit (DC): 19.2 V

- Supply voltage / permissible range, upper limit (DC): 28.8 V

- Input current / Current consumption, max.: 320 mA; with 19.2 V supply

- Power / Power consumption from the backplane bus: 1.15 W

- Power loss / Power loss, typ.: 7 W

- Analog outputs / Output ranges, current - 0 to 20 mA: Yes

- Analog outputs / Output ranges, current - -20 mA to +20 mA: Yes

- Analog outputs / Output ranges, current - 4 mA to 20 mA: Yes

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - Resolution with overrange (bit including sign), max.: 16 bit

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - Conversion time (per channel): 50 μs; independent of number of activated channels

- Analog value generation for the outputs / Settling time - for resistive load: 30 μs; see additional description in the manual

- Errors/accuracies / Output ripple (relative to output range, bandwidth 0 to 50 kHz),: 0.02 %

- Errors/accuracies / Linearity error (relative to output range), (+/-): 0.15 %

- Errors/accuracies / Temperature error (relative to output range), (+/-): 0.002 %/K

- Isochronous mode / Execution and activation time (TCO), min.: 100 μs

- Isochronous mode / Bus cycle time (TDP), min.: 250 μs

- Interrupts/diagnostics/status information / Diagnostics function: Yes

- Interrupts/diagnostics/status information / Substitute values connectable: Yes

- Interrupts/diagnostics/status information / Alarms - Diagnostic alarm: Yes

- Permissible potential difference / between S- and MANA (UCM): 8 V DC

- Isolation / Isolation tested with: 707 V DC (type test)

- Ambient conditions / Ambient temperature during operation - horizontal installation, min.: -30 °C; From FS03

- Ambient conditions / Ambient temperature during operation - horizontal installation, max.: 60 °C

- Ambient conditions / Ambient temperature during operation - vertical installation, min.: -30 °C; From FS03

Thông tin đặt hàng theo catalog Siemens: SIMATIC S7-1500, analog output module AQ8xU/I HS, 16-bit resolution accuracy 0.3%, 8 channels in groups of 8, diagnostics; substitute value 8 channels in 0.125 ms oversampling; the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. delivery including infeed element, shielding

Đặt mua Mô-đun 6ES7532-5HF00-0AB0 hoặc yêu cầu báo giá dự án ngay trên website.