Thiết bị truyền thông Siemens Communications processor CP 443-5 S5-compatible 6GK7443-5DX05-0XE0

Thiết bị truyền thông Siemens Communications processor CP 443-5 S5-compatible, mã đặt hàng 6GK7443-5DX05-0XE0, là thiết bị thuộc dòng Communications processor CP 443-5 dành cho các hệ thống tự động hóa công nghiệp.

Phiên bản này có truyền thông PROFIBUS.

Dùng để kết nối và trao đổi dữ liệu giữa các thiết bị trong mạng công nghiệp.

Bảng thông số Communications processor CP 443-5 S5-compatible (theo datasheet Siemens)

- transfer rate / transfer rate - at the 1st interface / according to PROFIBUS: 9.6 kbit/s ... 12 Mbit/s

- interfaces / number of interfaces / according to Industrial Ethernet: 0

- interfaces / number of electrical connections - at the 1st interface / according to PROFIBUS: 1

- interfaces / type of electrical connection - at the 1st interface / according to PROFIBUS: 9-pin Sub-D socket (RS485)

- supply voltage, current consumption, power loss / type of voltage / of the supply voltage: DC

- supply voltage, current consumption, power loss / supply voltage / 1 / from backplane bus: 5 V

- supply voltage, current consumption, power loss / relative symmetrical tolerance / at DC - at 5 V: 5 %

- ambient conditions / ambient temperature - during operation: 0 ... 60 °C

- ambient conditions / ambient temperature - during storage: -40 ... +70 °C

- ambient conditions / ambient temperature - during transport: -40 ... +70 °C

- design, dimensions and weights / module format: Compact module S7-400 single width

- design, dimensions and weights / width: 25 mm

- design, dimensions and weights / height: 290 mm

- product features, product functions, product components / general / number of units - per CPU / maximum: 14

- product features, product functions, product components / general / number of DP devices - on DP master / operable: 125

- product features, product functions, product components / general / data volume - of the address range of the inputs / as DP master / total: 4096 byte

- performance data / S7 communication / number of possible connections / for S7 communication - maximum: 48

- performance data / multi-protocol mode / number of active connections / with multi-protocol mode - without DP / maximum: 59

- performance data / multi-protocol mode / number of active connections / with multi-protocol mode - with DP / maximum: 54

- product functions / management, configuration, engineering / configuration software - required: STEP 7 V5.4 SP4 or higher / STEP 7 Professional V12 (TIA Portal) or higher

- product functions / management, configuration, engineering / product function / is supported / identification link: Yes; acc. to IEC 61406-1:2022

- product functions / routing / number of possible connections / with dataset routing /: 30

- product functions / time / product function / pass on time synchronization: Yes

- product functions / time / protocol / is supported - SIMATIC time synchronization (SIMATIC Time): Yes

Thông tin đặt hàng theo catalog Siemens: CP 443-5 Extended Communications processor CP 443-5 Extended for connection of SIMATIC S7-400 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication.

Vui lòng cung cấp mã 6GK7443-5DX05-0XE0 và số lượng cần mua để nhận báo giá chi tiết.