Thiết bị truyền thông Siemens Communications processor CP 443-5 S5-compatible 6GK7443-5DX05-0XE1

Dòng Communications processor CP 443-5 của Siemens có nhiều phiên bản, trong đó 6GK7443-5DX05-0XE1 là Thiết bị truyền thông Communications processor CP 443-5 S5-compatible.

Theo dữ liệu của nhà sản xuất, sản phẩm có truyền thông PROFIBUS.

Dùng để kết nối và trao đổi dữ liệu giữa các thiết bị trong mạng công nghiệp.

Thông số chính của 6GK7443-5DX05-0XE1 (theo datasheet Siemens)

- transfer rate / transfer rate - at the 1st interface / according to PROFIBUS: 9.6 kbit/s ... 12 Mbit/s

- interfaces / number of interfaces / according to Industrial Ethernet: 0

- interfaces / number of electrical connections - at the 1st interface / according to PROFIBUS: 1

- interfaces / type of electrical connection - at the 1st interface / according to PROFIBUS: 9-pin Sub-D socket (RS485)

- supply voltage, current consumption, power loss / type of voltage / of the supply voltage: DC

- supply voltage, current consumption, power loss / supply voltage / 1 / from backplane bus: 5 V

- supply voltage, current consumption, power loss / relative symmetrical tolerance / at DC - at 5 V: 5 %

- ambient conditions / ambient temperature - during operation: 0 ... 60 °C

- ambient conditions / ambient temperature - during storage: -40 ... +70 °C

- ambient conditions / ambient temperature - during transport: -40 ... +70 °C

- design, dimensions and weights / module format: Compact module S7-400 single width

- design, dimensions and weights / width: 25 mm

- design, dimensions and weights / height: 290 mm

- product features, product functions, product components / general / number of units - DPV1: Yes

- product features, product functions, product components / general / number of DP devices - on DP master / operable: 125

- product features, product functions, product components / general / data volume - of the address range of the inputs / as DP master / total: 4096 byte

- performance data / S7 communication / number of possible connections / for S7 communication - maximum: 48

- performance data / multi-protocol mode / number of active connections / with multi-protocol mode - without DP / maximum: 59

- performance data / multi-protocol mode / number of active connections / with multi-protocol mode - with DP / maximum: 54

- product functions / management, configuration, engineering / configuration software - required: STEP 7 V5.4 SP4 or higher / STEP 7 Professional V12 (TIA Portal) or higher

- product functions / management, configuration, engineering / product function / is supported / identification link: Yes; acc. to IEC 61406-1:2022

Mô tả gốc từ nhà sản xuất: CP 443-5 Extended Communications processor CP 443-5 Extended for connection of SIMATIC S7-400 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication conformal coating.

Chúng tôi hỗ trợ tư vấn chọn mã tương đương và phụ kiện đi kèm cho Communications processor CP 443-5 S5-compatible.