Màn hình HMI Siemens SIMATIC HMI KTP400 Comfort Comfort Panel 6AV2124-2DC01-0AX0

Nếu bạn đang tìm Màn hình HMI dòng SIMATIC HMI KTP400 Comfort, mã 6AV2124-2DC01-0AX0 của Siemens tương ứng với phiên bản SIMATIC HMI KTP400 Comfort Comfort Panel.

Phiên bản này có truyền thông PROFINET, PROFIBUS, bộ nhớ 4 MB.

Dùng làm giao diện vận hành tại máy, giúp người vận hành theo dõi và điều khiển quá trình.

Dữ liệu kỹ thuật SIMATIC HMI KTP400 Comfort 6AV2124-2DC01-0AX0 (theo datasheet Siemens)

- General information / Product type designation: KTP400 Comfort

- Display / Design of display: TFT

- Display / Screen diagonal: 4.3 in

- Display / Display width: 95 mm

- Control elements / Keyboard - Function keys - Number of function keys: 4

- Control elements / Keyboard - Function keys - Number of function keys with LEDs: 4

- Control elements / Keyboard - Keys with LED: Yes

- Installation type/mounting / Mounting position: vertical

- Installation type/mounting / Mounting in portrait format possible: Yes

- Installation type/mounting / Mounting in landscape format possible: Yes

- Storage / Flash: Yes

- Storage / RAM: Yes

- Storage / Memory available for user data: 4 Mbyte

- Type of output / Acoustics - Buzzer: Yes

- Time of day / Clock - Hardware clock (real-time): Yes

- Time of day / Clock - Software clock: Yes

- Time of day / Clock - retentive: Yes; Back-up duration typically 6 weeks

- Interfaces / Number of industrial Ethernet interfaces: 1

- Interfaces / Number of RS 485 interfaces: 1; RS 422 / 485 combined

- Interfaces / Number of RS 422 interfaces: 1

- Protocols / PROFINET: Yes

- Protocols / Supports protocol for PROFINET IO: Yes

- Protocols / PROFIBUS: Yes

- Interrupts/diagnostics/status information / Diagnoses - Diagnostic information readable: Yes; S7 controller

- EMC / Emission of radio interference acc. to EN 55 011 - Limit class A, for use in industrial areas: Yes

- Degree and class of protection / IP (at the front): IP65

- Degree and class of protection / IP (rear): IP20

- Degree and class of protection / NEMA (front) - Enclosure Type 4 at the front: Yes

- Ambient conditions / Ambient temperature during operation - Operation (vertical installation) - For vertical installation, min.: 0 °C

- Ambient conditions / Ambient temperature during operation - Operation (vertical installation) - For vertical installation, max.: 50 °C

Nội dung catalog của mã 6AV2124-2DC01-0AX0: SIMATIC HMI KTP400 Comfort, Comfort Panel, key/touch operation, 4" widescreen TFT display, 16 million colors, PROFINET interface, MPI/PROFIBUS DP interface, 4 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11

Đặt mua Màn hình HMI 6AV2124-2DC01-0AX0 hoặc yêu cầu báo giá dự án ngay trên website.