Bộ nguồn Siemens SITOP PSU6200 24 V/20 A 6EP3336-7SB00-3AX0

Bộ nguồn SITOP PSU6200 24 V/20 A mang mã 6EP3336-7SB00-3AX0, là sản phẩm của Siemens trong hệ sinh thái SITOP PSU6200 24 V/20 A.

Điểm cần lưu ý khi chọn 6EP3336-7SB00-3AX0: điện áp 120 - 240 V, dòng điện 20 A.

Cấp nguồn một chiều ổn định cho PLC, cảm biến và các thiết bị trong tủ điều khiển.

Thông số chính của 6EP3336-7SB00-3AX0 (theo datasheet Siemens)

- General information / product brand name: SITOP

- General information / product type designation: PSU6200

- General information / product designation: Power supply SITOP PSU6200

- input / type of the power supply network: 1-phase AC or DC

- input / phase number: 1

- input / voltage curve at input: AC/DC

- output / relative control precision of the output voltage - on slow fluctuation of input voltage: 0.2 %

- output / relative control precision of the output voltage - on slow fluctuation of ohm loading: 0.2 %

- output / residual ripple - maximum: 80 mV

- efficiency / efficiency in percent: 95.5 %

- efficiency / power loss [W] - at rated output voltage for rated value of the output: 25 W

- efficiency / power loss [W] - during no-load operation maximum: 2.6 W

- closed-loop control / relative control precision of the output voltage at load step of: 3 %

- closed-loop control / setting time - load step 10 to 90% typical: 0.5 ms

- closed-loop control / setting time - load step 90 to 10% typical: 0.5 ms

- protection and monitoring / design of the overvoltage protection: < 32 V

- protection and monitoring / property of the output short-circuit proof: Yes

- protection and monitoring / design of short-circuit protection: Shutdown and periodic restart attempts

- ambient conditions / ambient temperature - during operation: -30 ... +70 °C; with natural convection a monotonically increasing start-up from -25 °C, safe start-up from -40 °C

- ambient conditions / ambient temperature - during transport: -40 ... +85 °C

- ambient conditions / ambient temperature - during storage: -40 ... +85 °C

- connection method / type of electrical connection: push-in terminals

- connection method / at input: L1/+, L2/N/-, PE: push-in for 0.5 ... 4 mm² single-core/finely stranded

- connection method / at output: +1, +2, -1, -2, -3: push-in for 0.5 ... 6 mm²

- mechanical data / width × height × depth of the enclosure: 70 × 135 × 155 mm

- accessories / electrical accessories: Buffer module, redundancy module

- accessories / mechanical accessories: Identification labels SIMATIC ET 200SP 6ES7193-6LF30-0AW0

- further information internet links / identification link: Yes; acc. to IEC 61406-1:2022

- additional information / other information: Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Mô tả gốc từ nhà sản xuất: SITOP PSU6200/1AC/24VDC/20A SITOP PSU6200 24 V/20 A stabilized power supply input: 120 - 240 V AC (110 - 240 V DC) output: 24 V DC/20 A with diagnostic interface

Liên hệ với chúng tôi để được tư vấn lựa chọn và báo giá 6EP3336-7SB00-3AX0.