Mô-đun Siemens SIMATIC S7-1500 6ES7532-5NB00-0AB0

Nếu bạn đang tìm Mô-đun dòng SIMATIC S7-1500, mã 6ES7532-5NB00-0AB0 của Siemens tương ứng với phiên bản SIMATIC S7-1500.

Phù hợp khi cần bổ sung kênh tín hiệu cho tủ điều khiển hiện có.

Dữ liệu kỹ thuật SIMATIC S7-1500 6ES7532-5NB00-0AB0 (theo datasheet Siemens)

- General information / Product type designation: AQ 2xU/I ST

- General information / HW functional status: from FS01

- General information / Firmware version: V1.0.0

- CiR - Configuration in RUN / Reparameterization possible in RUN: Yes

- CiR - Configuration in RUN / Calibration possible in RUN: Yes

- Supply voltage / Rated value (DC): 24 V

- Supply voltage / permissible range, lower limit (DC): 19.2 V

- Supply voltage / permissible range, upper limit (DC): 28.8 V

- Input current / Current consumption, max.: 110 mA

- Power / Power consumption from the backplane bus: 0.65 W

- Power loss / Power loss, typ.: 2.7 W

- Analog outputs / Number of analog outputs: 2

- Analog outputs / 4 mA to 20 mA: Yes

- Analog outputs / Connection of actuators - for voltage output two-wire connection: Yes

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - Resolution with overrange (bit including sign), max.: 16 bit

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - Conversion time (per channel): 0.5 ms

- Analog value generation for the outputs / Settling time - for resistive load: 1.5 ms

- Errors/accuracies / Output ripple (relative to output range, bandwidth 0 to 50 kHz),: 0.02 %

- Errors/accuracies / Linearity error (relative to output range), (+/-): 0.15 %

- Errors/accuracies / Temperature error (relative to output range), (+/-): 0.002 %/K

- Interrupts/diagnostics/status information / Diagnostics function: Yes

- Interrupts/diagnostics/status information / Substitute values connectable: Yes

- Interrupts/diagnostics/status information / Alarms - Diagnostic alarm: Yes

- Isolation / Isolation tested with: 707 V DC (type test)

- Ambient conditions / Ambient temperature during operation - horizontal installation, min.: -30 °C; from FS04

- Ambient conditions / Ambient temperature during operation - horizontal installation, max.: 60 °C

- Ambient conditions / Ambient temperature during operation - vertical installation, min.: -30 °C; from FS04

- Dimensions / Width: 25 mm

- Dimensions / Height: 147 mm

- Dimensions / Depth: 129 mm

Nội dung catalog của mã 6ES7532-5NB00-0AB0: SIMATIC S7-1500, analog output module AQ 2x U/I ST, 16-bit resolution accuracy 0.3%. 2 channels in groups of 2, diagnostics; substitute value; the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 2 / PL c according to EN ISO 13849-1:2015. delivery including front connector push-in, infeed element, shielding bracket and shield

Đặt mua Mô-đun 6ES7532-5NB00-0AB0 hoặc yêu cầu báo giá dự án ngay trên website.