Mô-đun Siemens SIMATIC S7-1500 Analog infeed element 6ES7534-7QE00-0AB0

Với mã 6ES7534-7QE00-0AB0, Mô-đun SIMATIC S7-1500 Analog infeed element là một lựa chọn trong dải sản phẩm SIMATIC S7-1500 Analog của Siemens.

Giúp hệ PLC thích ứng với yêu cầu tín hiệu của từng máy mà không cần đổi CPU.

Bảng thông số SIMATIC S7-1500 Analog infeed element (theo datasheet Siemens)

- General information / Product type designation: AI 4xU/I/RTD/TC /AQ 2xU/I ST

- General information / HW functional status: from FS01

- General information / Firmware version: V1.0.0

- CiR - Configuration in RUN / Reparameterization possible in RUN: Yes

- CiR - Configuration in RUN / Calibration possible in RUN: Yes

- Supply voltage / Rated value (DC): 24 V

- Supply voltage / permissible range, lower limit (DC): 19.2 V

- Supply voltage / permissible range, upper limit (DC): 28.8 V

- Input current / Current consumption, max.: 200 mA

- Encoder supply / 24 V encoder supply - Short-circuit protection: Yes

- Encoder supply / permissible input current for current input (destruction limit),: 40 mA

- Encoder supply / Constant measurement current for resistance-type transmitter,: 150 Ohm, 300 Ohm, 600 Ohm, Pt100, Pt200, Ni100: 1.25 mA; 6 000 Ohm,

- Analog value generation for the inputs / Measurement principle: integrating

- Analog value generation for the inputs / Integration and conversion time/resolution per channel - Resolution with overrange (bit including sign), max.: 16 bit

- Analog value generation for the inputs / Integration and conversion time/resolution per channel - Integration time, parameterizable: Yes

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - for resistance measurement with two-wire connection: Yes; Only for PTC

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - for resistance measurement with three-wire connection: Yes; All measuring ranges except PTC; internal compensation of the cable resistances

- Analog value generation for the outputs / Integration and conversion time/resolution per channel - for resistance measurement with four-wire connection: Yes; All measuring ranges except PTC

- Errors/accuracies / Linearity error (relative to input range), (+/-): 0.02 %

- Errors/accuracies / Temperature error (relative to input range), (+/-): 0.005 %/K; With TC type T 0.02 ± % / K

- Errors/accuracies / Crosstalk between the inputs, max.: -80 dB

- Interrupts/diagnostics/status information / Diagnostics function: Yes

- Interrupts/diagnostics/status information / Substitute values connectable: Yes

- Interrupts/diagnostics/status information / Monitoring of the supply voltage (PWR-LED): Yes; green LED

- Potential separation / Potential separation analog inputs - between the channels, in groups of: 4

- Potential separation / Potential separation analog inputs - between the channels and backplane bus: Yes

- Potential separation / Potential separation analog inputs - Between the channels and load voltage L+: Yes

- Permissible potential difference / between the inputs (UCM): 20 V DC

- Permissible potential difference / Between the inputs and MANA (UCM): 10 V DC

- Permissible potential difference / between S- and MANA (UCM): 8 V DC

Thông tin đặt hàng theo catalog Siemens: SIMATIC S7-1500 Analog input/output module AI 4x U/I/R/RTD/TC ST; 4 channels in groups of 4; Hardware interrupts; Diagnostics AQ 2x U/I ST; 2 channels in groups of 2; Substitute value; Diagnostics Common mode voltage approx. 10 V 16 bit; Accuracy 0.3%; Delivery including push-in front connector, infeed element, shield bracket and shield terminal

Đặt mua Mô-đun 6ES7534-7QE00-0AB0 hoặc yêu cầu báo giá dự án ngay trên website.