Mô-đun Siemens SIMATIC S7-1500 analog input module AI 16xI BA 6ES7531-7MH00-0AB0

Mô-đun Siemens SIMATIC S7-1500 analog input module AI 16xI BA, mã đặt hàng 6ES7531-7MH00-0AB0, là thiết bị thuộc dòng SIMATIC S7-1500 dành cho các hệ thống tự động hóa công nghiệp.

Dùng để mở rộng số lượng ngõ vào/ra hoặc chức năng cho hệ điều khiển.

Bảng thông số SIMATIC S7-1500 analog input module AI 16xI BA (theo datasheet Siemens)

- General information / Product type designation: AI 16xI BA

- General information / HW functional status: from FS01

- General information / Firmware version: V1.0.0

- CiR - Configuration in RUN / Reparameterization possible in RUN: Yes

- Input current / Current consumption, max.: 0 mA

- Power / Power consumption from the backplane bus: 0.85 W

- Power loss / Power loss, typ.: 1.2 W

- Address area / Address space per module - Inputs: 32 byte

- Address area / Address space per module - Outputs: 0 byte

- Analog inputs / shielded, max.: 800 m

- Analog value generation for the inputs / Measurement principle: integrating

- Analog value generation for the inputs / Integration and conversion time/resolution per channel - Resolution with overrange (bit including sign), max.: 16 bit

- Analog value generation for the inputs / Integration and conversion time/resolution per channel - Integration time, parameterizable: Yes

- Encoder / Connection of signal encoders - for current measurement as 2-wire transducer: Yes; with external supply

- Encoder / Connection of signal encoders - for current measurement as 4-wire transducer: Yes

- Errors/accuracies / Linearity error (relative to input range), (+/-): 0.1 %

- Errors/accuracies / Temperature error (relative to input range), (+/-): 0.006 %/K

- Errors/accuracies / Crosstalk between the inputs, max.: -50 dB

- Interrupts/diagnostics/status information / Diagnostics function: Yes

- Interrupts/diagnostics/status information / Alarms - Diagnostic alarm: Yes

- Interrupts/diagnostics/status information / Alarms - Limit value alarm: Yes; two upper and two lower limit values in each case

- Potential separation / Potential separation channels - between the channels, in groups of: 16

- Potential separation / Potential separation channels - between the channels and backplane bus: Yes

- Permissible potential difference / between the inputs (UCM): 8 V DC

- Permissible potential difference / Between the inputs and MANA (UCM): 4 V DC

- Isolation / Isolation tested with: 707 V DC (type test)

- Ambient conditions / Ambient temperature during operation - horizontal installation, min.: -30 °C

- Ambient conditions / Ambient temperature during operation - horizontal installation, max.: 60 °C

- Ambient conditions / Ambient temperature during operation - vertical installation, min.: -30 °C

- Dimensions / Width: 35 mm

Thông tin đặt hàng theo catalog Siemens: SIMATIC S7-1500, analog input module AI 16xI BA, 16-bit resolution accuracy 0.5%, 16 channels in groups of 16, common mode voltage 4 V DC, diagnostics, hardware interrupts; delivery including infeed element, shield bracket and shield terminal: front connector (screw terminals or push-in) to be ordered separately

Đặt mua Mô-đun 6ES7531-7MH00-0AB0 hoặc yêu cầu báo giá dự án ngay trên website.