Mô-đun Siemens SIMATIC S7-400 6ES7450-1AP01-0AE0

Nếu bạn đang tìm Mô-đun dòng SIMATIC S7-400, mã 6ES7450-1AP01-0AE0 của Siemens tương ứng với phiên bản SIMATIC S7-400.

Giúp hệ PLC thích ứng với yêu cầu tín hiệu của từng máy mà không cần đổi CPU.

Dữ liệu kỹ thuật SIMATIC S7-400 6ES7450-1AP01-0AE0 (theo datasheet Siemens)

- Supply voltage / Auxiliary voltage 1L+, load voltage 2L+ - Rated value (DC): 24 V

- Supply voltage / Auxiliary voltage 1L+, load voltage 2L+ - permissible range, lower limit (DC): 20.4 V; Dynamic 18.5 V

- Supply voltage / Auxiliary voltage 1L+, load voltage 2L+ - permissible range, upper limit (DC): 28.8 V; dynamic 30.2 V

- Input current / from load voltage 1L+ (without load), max.: 50 mA

- Input current / from load voltage 2L+ (without load), max.: 60 μA

- Input current / from backplane bus 5 V DC, max.: 300 mA

- Encoder supply / 5 V encoder supply - 5 V: Yes; 5.2 V ±2 %

- Encoder supply / 5 V encoder supply - Short-circuit protection: Yes

- Encoder supply / 5 V encoder supply - Output current, max.: 300 mA

- Power loss / Power loss, typ.: 6 W

- Digital inputs / Number of digital inputs: 6

- Digital inputs / Functions: 1 for gate start, 1 for gate stop, 1 for setting the counter

- Digital inputs / Input voltage - for signal "0": -28.8 ... +5V

- Digital outputs / Number of digital outputs: 4

- Digital outputs / Short-circuit protection: Yes; Clocked electronically

- Digital outputs / Limitation of inductive shutdown voltage to: 2L+ (-39 V)

- Interrupts/diagnostics/status information / Status indicator: Yes; 14 green LEDs for status of CR, DIR, inputs and outputs

- Interrupts/diagnostics/status information / Diagnostics function: Yes

- Interrupts/diagnostics/status information / Alarms - Diagnostic alarm: Yes; Parameterizable

- Counter / Number of counter inputs: 2; 32 bit or ±31 bit

- Counter / Counter input 5 V - Type: RS 422

- Counter / Counter input 5 V - terminating resistor: 220 Ω

- Potential separation / Potential separation digital inputs - between the channels and backplane bus: Yes; Optocoupler

- Potential separation / Potential separation digital outputs - between the channels and backplane bus: Yes; Optocoupler

- Potential separation / Potential separation counter - between the channels and backplane bus: Yes; Optocoupler

- Isolation / Isolation tested with: 500 V

- Connection method / required front connector: 1x 48-pin

- Dimensions / Width: 25 mm

- Dimensions / Height: 290 mm

- Dimensions / Depth: 210 mm

Nội dung catalog của mã 6ES7450-1AP01-0AE0: SIMATIC S7-400, function module FM 450-1 for counter function with 2 channels incl. configuration package on CD

Vui lòng cung cấp mã 6ES7450-1AP01-0AE0 và số lượng cần mua để nhận báo giá chi tiết.